Detailed Product Description

I. Features:

1.         Easy setting; easy operation.

2.         Safe start-up system. (The motor wont be started no matter which position the throttle stick is on when the battery is connected).

3.         Automatic power cut-off. (When the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off.)

4.         BEC provides power to receiver and servos (for ESC with BEC).

5.         High rate switching Pulse Width Modulation (PWM): 8KHZ.

6.         Over-heat protection. The power will be cut-off as it is heated up to 110.

7.         Over-voltage protection. The motor wont be started if the voltage is higher than 18V (Expect for the OPTO series.)

8.         Low-voltage cut-off. 3.0V/2.7V (selectable) for Li-ion/Li-polymer battery; 0.9V/0.7V (selectable) for Ni-CD/Ni-MH battery.

9.         Timing mode.: Timing low mode--- providing highest efficiency suitable for motors with 2, 4, 6 poles; Timing high mode---providing highest rotation speed & biggest current suitable for motors with 6 or more poles and outrunning motors.

10.      Programming Card: Programming can be done on the programming board easily.

II. Factory Default Setting:

1.         Brake off.

2.         Timing high---for outrunning motors and motors with more than 6 poles.

3.         Throttle curve----linear.

4.         Battery type: Li-ion/Li-Polymer battery.

5.         Cut-off voltage: cut-off voltage low. 2.7V for Li-xx battery.

6.         Cut-off type: cut-off soft, reduce the power when the voltage drops to the cut-off voltage.

III. OperationFor ESC with Advance plus Prog-Card

1.       Connection (Connect the motor & ESC / Connect the receiver & ESC)

2.       Using of Advance plus Prog-Card and Start-Up.